Medical Products Supplies Companies

No. 151 FengLi St., Suzhou Industrial Park, 215000 Suzhou
China
Telephone +86 512 65001777
Fax +86 512 65001778
harryxiao@microport.com
http://www.microport.com

Product Categories

Product categories

01 Electromedical Equipment / Medical Technology
01.05 Implants and protheses
01.05.03 Orthopaedic implants and prostheses

Orthopaedic implants and prostheses

BIOLOX® Delta® Hip Ceramic Products
GLADIATOR® Bipolar Femoral Head System
PROFEMUR® Z Femoral Stem System

Our products

Product category: Orthopaedic implants and prostheses
BIOLOX® Delta® Hip Ceramic Products
Product Introduction
BIOLOX® Delta® ceramic hip products combine the stability of alumina with the strength of zirconia. When there is a crack propagation, zirconium oxide particles engage airbag-effect by absorbing impacting forces and platelet shaped crystals block the propagation crack, so as to increase the strength and toughening of the prosthesis.

Product Features

Ultralow abrasion(super hardness, anti-scratching, surface quality, material wettability)
Optimal bio-compatibility (no corrosion, no metal ions, low biological response)
Low bone osteolysis rate, high prosthesis survivorship

Product category: Orthopaedic implants and prostheses
GLADIATOR® Bipolar Femoral Head System
The GLADIATOR® bipolar femoral head system has superior locking mechanism and more strength. The bearing surface inside the shell is cross-linked polyethylene. The use of cross-linked polyethylene results in a significant reduction in the amount of particles that are created from wear compared to UHMWPE..

Product Features

CoCr shells with 1mm increments
XLPE insert fixed in shell
The UHMWPE support ring permanently fixed in shell.
The UMHWPE locking ring assembled above support ring
Only one component in one package
No assembly/disassemble required prior to implantation

Product category: Orthopaedic implants and prostheses
PROFEMUR® Z Femoral Stem System
The PROFEMUR® Z femoral stem prosthesis is developed based on the successful experience of rectangular femoral stem prosthesis. This design achieves the axial stability through the dual taper geometry design, and the rectangular cross-section can obtain four-point fixation in the femoral medullary canal.

Product Features

Increased trochanteric wing contributes to proximal fill and rotation stability
Increased trochanteric wing contributes to proximal fill and rotation stability
Grit blast texture (Ra 8μm) of titanium stem promotes bone on-growth
Standard and Short Neck-length available, both designs have 1-9 sizes to satisfy most clinical demands.
Dual taper geometry design to provide optimal primary fixation and load transfer
Rounded distal tip designed to reduce the risk of fracture during insertion and minimize point contact after implantation
Dimple designed for uni-directional loading during stem insertion and oval slot designed for rotational control during stem insertion.

ad: contact information

About Us

Company details
A Patient Oriented Global Enterprise
MicroPort was founded in 1998 in a small office in ZJ Hi-Tech Park in Shanghai China, where a group of dedicated individuals joined together by the common belief that advancements in medical technology could transform patients’ lives around the globe. Over the last two decades, MicroPort has taken important steps towards fulfilling its mission of providing access to the best means of prolonging and reshaping lives.

Global Network
On top of its headquarters in ZJ Hi-Tech Park, Shanghai, MicroPort has established a global footprint of Research and Development (R&D) and manufacturing facilities, including locations in the United States (Memphis, TN), France (Clamart), Italy, (Saluggia), the Dominican Republic (Santo Domingo), and various cities across China, with a diverse global workforce that exceeds 6,000 employees.

A force of innovation spanning over 10 Major areas
At MicroPort innovation is present in everything we do¸ not only in the treatments and services we develop but also in the way we foster innovation. MicroPort is a consortium of subsidiaries closely collaborating together, sharing resources and expertise yet retaining the independence and agility to innovate. Currently, MicroPort® is focused in covering 10 major areas with various subsidiaries and over 300 devices and technologies.

ad: company