SONOTEC GmbH

Nauendorfer Str. 2, 06112 Halle (Saale)
Germany
Telephone +49 345 13317-0
Fax +49 345 13317-99
sonotec@sonotec.de
http://www.sonotec.eu

Product Categories

Product categories

05 Components, modules, OEM equipment
05.13 Other components, modules, OEM equipment

Other components, modules, OEM equipment

BLD | Blood Leak Detector

06 Electrical components, electronical components
06.01 Sensors
06.01.05 Flow sensors

Flow sensors

SONOFLOW CO.56 Pro | FlowBubble Sensor
SONOFLOW CO.55 | Clamp-On Sensor
SONOFLOW IL.52 | Inline-Sensor

06 Electrical components, electronical components
06.01 Sensors
06.01.06 Gas sensors

Gas sensors

SONOCHECK ABD Air Bubble Sensors | Medical Devices

06 Electrical components, electronical components
06.14 Other electrical / electronical components

Other electrical / electronical components
Our products

Product category: Flow sensors
SONOFLOW CO.56 Pro | FlowBubble Sensor
Hybrid FlowBubble Sensor for Medical Devices

PRODUCT BENEFITS

Combined flow measurement and air bubble detection
Highly accurate non-invasive fluid monitoring
Contactless air bubble detection in tubing systems carrying liquids
Specified for medical applications
Integrated electronics, no need for an external electronics board
Serial RS485 interface with MODBus protocol

SONOFLOW CO.56/CO.56 Pro Clamp-On Sensor – Hybrid FlowBubble Sensor for Medical Devices
The SONOFLOW CO.56 combines two measuring methods in one compact device whereat the sensor measures the flow rate of liquids in flexible tubes and simultaneously detects air bubbles. The product family is specifically designed for use in medical devices and meets the very high safety requirements of the industry.

The implemented electronics board and data processing unit allows an easy integration into the networking architecture of the application. In addition, the RS485 serial protocol enables to operate and connect up to twelve sensors of the SONOFLOW CO.56 sensor series. The non-invasive clamp-on system can be easily applied onto microbiologically sensitive applications. Implementation can be either free-hanging or fixed.

The optional SONOFLOW Monitor Software makes computer-assisted parameterization and visualization of the measured values an easy task. Thus, the SONOFLOW CO.56 becomes a truly flexible measurement tool.

Depending on the application, the product line is available in aluminum, customer-specific housing dimensions as well as housing materials and for use with different tubing sizes.

Product category: Flow sensors
SONOFLOW CO.55 | Clamp-On Sensor
For contactless flow metering in flexible tubes

PRODUCT BENEFITS

Highly accurate non-invasive measurement
No interference with the liquid
Quick measurement of pulsating and bi-directional flow
Great features for volume dosing
Built-in electronics, no external electronic board required

SONOFLOW CO.55 Clamp-On Sensor – Non-invasive Flow Sensor for Liquids
The ultrasonic flow sensor SONOFLOW CO detects the flow rate of liquids in plastic tubes quickly and reliably. The non-invasive sensor has no contact to the medium and is particularly suited for applications with strict hygienic standards. The clamp-on mounting concept eliminates any risk of contamination or leaking.

Besides multiple off-the-shelf standard sizes, different housing materials, such as aluminum, stainless steel or plastics, are also available.

The contactless flow sensor SONOFLOW CO combines precise measuring performance and high quality with a unique compact and cost efficient sensor concept.

Suitable for most types and sizes of plastic tubing available on the market

Multiple off-the-shelf standard sizes for various tubing dimensions
Sensor solutions for tubing materials, such as PVC, silicone, PFA, PTFE, etc.

Signal processing

Complete electronic signal processing unit integrated into the sensor body
No external electronics board or display required
Configurable current, frequency or pulse output

System Integration

Easy to integrate into existing systems via RS485 interface
Advanced software tool for parameterization and calibration
Convenient readout of measuring values

Product category: Flow sensors
SONOFLOW IL.52 | Inline-Sensor
For precise measurement of low volume flow rates in pipes and tubes

PRODUCT BENEFITS

Quick measurement without any time lag
Measurement of intermittent flows feasible
Widely independent of colour and electromagnetic characteristics of the liquid
No wear and tear
User defined position of the sensor
Sterilizable

SONOFLOW IL.52 Inline Sensor – Highly accurate ultra-low flow sensor for flows as low as 0.4 ml/min
SONOFLOW IL.52 sensors are designed for precise measurement of ultra-low flow rates – performing fast and bidirectional. Due to its instantaneous measuring method with high repetition rates, the SONOFLOW IL.52 is suitable for quick dosing processes and for measuring pulsating flows.

Real-time flow measurement
Volume Dosing / Totalizer
Flow Switch for controlling external devices

Robust & maintenance-free sensor design
Since the sensor is integrated into devices or machines and comes into direct contact with the medium, product contacted components are exclusively made of high-grade PEEK material. Thus, the in-line sensor is ready for sterilization-in-place (SIP), clean-in-place (CIP), and autoclave applications. In addition, the robust sensor design impresses with its high temperature resistance without affecting measurements negatively. The sensor is wear- and maintenance-free and can be fitted in any position.

Product category: Gas sensors
SONOCHECK ABD Air Bubble Sensors | Medical Devices
For medical applications with very high safety requirements

PRODUCT BENEFITS

Different safety concepts
Non-invasive measurement
Compact & modular design
Built-in electronics, no external electronic board required
Application-specific microbubble detection
No coupling medium required
No wear and tear
Optional software for parameterization and testing

SONOCKECK ABD05 | ABD07 | ABD08 – reliable bubble sensors for use in medical technologies
The non-invasive SONOCHECK ABD05 | ABD07 | ABD08 bubble sensor series has been specifically designed for very high safety requirements in medical devices. The smart sensors are applied to detect air and gas bubbles or foam in flexible plastic tubes filled with liquids such as blood, blood plasma, water or saline solution or are used for wet/dry alarm notifications.

In most medical applications, the sensors are intended to prevent air infusions which could lead to an endangerment of patients.

ABD Air Bubble Sensors for Medical Technology – Easy Plug & Play Integration

Compact design for applications with high hygienic requirements
Tubes are simply inserted into the sensor with dry coupling
Automated adaption onto dynamically changing acoustic conditions

Product category: Other components, modules, OEM equipment
BLD | Blood Leak Detector
Optical Clamp-on Sensor for Contactless Detection of Smallest Traces of Blood

PRODUCT BENEFITS

Optical sensor with adapted wavelength
Non-invasive measurement
No wear and tear
Highly resistant to ambient light
Programming and test kit
Software development according to IEC 62304:2006, class C

Blood Leak Detector BLD | Contactless Detection of Smallest Traces of Blood
The optical sensor BLD detects non-invasively smallest amounts of blood in dialysates on transparent tubes. As the wavelength is adapted to the transmittance of blood, the international standard IEC 60601-2-16:2008 for medical electrical devices is fulfilled reliably. Hence, the sensor is able to detect even 0.04 percent of blood in an isotonic saline solution.

Two Configurations for Manifold Specifications

The BLD01 meets high safety standards and features a serial interface. With simple commands, the sensor can be tested and the sensitivity adjusted.
Hence, the BLD02 has been developed strictly according to the software requirements of the international standard IEC 62304:2006, class C and meets highest demands on patient safety and reliability.

Intelligent Optical Clamp-On Sensor
As a clamp-on component the non-invasive sensor with remote electronics is suitable for all tasks that require the optical detection of transmission differences of liquids in transparent tubes. Due to the high sensitivity of the sensor it is even possible to recognize if a tube filled with a clear fluid runs empty. Certified according to ISO 13485 we support you with the documentation necessary for the approval of medical devices on request.

ad: contact information

About Us

Company data
Number of employees

100-499
Foundation

1991
Area of business

Electrical and electronic components

ad: company

SonoPoint GmbH
SONORING DORMED medizinische Systeme GmbH
Sonoscape Medical Germany GmbH
Sonovum AG
TDK-Micronas GmbH
Tecan Deutschland GmbH
Sonoscape Medical Germany GmbH
SONORING DORMED medizinische Systeme GmbH
SonoPoint GmbH
SONOGEL-Vertriebs GmbH
SOMNOmedics GmbH

Sonovum AG
TDK-Micronas GmbH
Tecan Deutschland GmbH
Technogym Germany GmbH
tecnotron elektronik gmbh