Medical Products Supplies Companies

Land Plot #25 & 27 First Industrial Zone, 11829 Badr City
Egypt
Telephone +20 2 28607492
Fax +20 2 28607491
intlsales@qmedicaldevices.com
http://www.qmedicalindustries.com

Product Categories

Product categories

01 Electromedical Equipment / Medical Technology
01.01 Diagnostics
01.01.14 Heart circulation diagnostics equipment

Heart circulation diagnostics equipment

Introducer Sheath
Inflation Device
Hemostasis Valve Y-Connector
Triple Manifold
Diagnostic Guidewire
Introducer Needle

01 Electromedical Equipment / Medical Technology
01.06 Intense medicine / anesthesiology / respiration
01.06.04 Inhaler and aerosol appliances

Inhaler and aerosol appliances

Nebulizer Mask
Oxygen Masks
Venturi Mask
Nasal Cannula
Bacterial Filter
Gas Sampling Line

05 Commodities and Consumer Goods
05.10 Catheters / urinary catheters and accessories

Catheters / urinary catheters and accessories

AV Fistula Needle
Bloodline
Infusion Set
Extension Lines
3-Way Stopcock
Blood Lancets
Nelaton Catheters
Suction Catheter

Our products

Product category: Inhaler and aerosol appliances
Nebulizer Mask
Nebulizers are used during aerosol therapy to vaporize a drug so that the patient can inhale it directly.

– Designed to output particles with a mean
micron diameter of 3.3 Microns*
– Stable housing for the cone to ensure
consistent vaporization
– Volume indicators on the cup allow for easy
indication of the amount of drug in the cup

Offered in the following configurations:

Nebulizer Mask – Adult Size
Nebulizer Mask – Pediatric
Nebulizer Mask – Neonatal
Nebulizer with Mouth Piece
T-Piece Nebulizer for Breathing Circuits

Product category: Inhaler and aerosol appliances
Oxygen Masks
Device worn over the nose and mouth through which oxygen is supplied to a patient from a storage tank.

– Latex free
– Volume-controlled design
– Incurved nose seal designed to prevent
oxygen from irritating the eyes

Configurations Available:

Oxygen Mask (Adult)
Oxygen Mask (Pediatric)
Oxygen Mask (Neonatal)

Product category: Catheters / urinary catheters and accessories
AV Fistula Needle
Specialty needles used during the hemodialysis process to connect bloodlines to blood vessels.

Features:
– Silicon coated cannula to improve patient comfort upon insertion, and to reduce the risk of clotting
– Safety Guard to reduce the likelihood of needle stick injuries
– Specially engineered clamp that gives the care provider the ability to react in the event of an adverse issue

Configurations:
FG-FN6WT : AV Fistula needle (16G) WITHOUT SAFETY
FG-FN7WT : AV Fistula needle (17G) WITHOUT SAFETY
FG-FN7ST : AV Fistula needle (17G) WITH SAFETY
FG-FN6ST : AV Fistula needle (16G) WITH SAFETY

Product category: Heart circulation diagnostics equipment
Introducer Sheath
Designed to allow for femoral or radial artery access during coronary catheterization, which is a minimally invasive procedure to access the coronary circulation using a catheter.

Features:

Advanced tipping technology used to achieve a lower insertion force
Specially engineered hemostasis valve to minimize blood leakage during insertion and withdrawl of devices

Configurations:
FS-SH6FN – 6 Fr Femoral Introducer Sheath without Introducer Needle
FS-SH6FW – 6 Fr Femoral Introducer Sheath with Introducer Needle
FS-SH6RN – 6 Fr Radial Introducer Sheath without Introducer Needle
FS-SH6RW – 6 Fr Radial Introducer Sheath with Introducer Needle

Product category: Heart circulation diagnostics equipment
Inflation Device
High pressure inflation device designed to exert
pressure for balloon inflation and deflation.

Features:
– 20 mL Chamber
– Capable of pressurizing up to 30 Bar (435 psi)
– Polycarbonate structure allows for a strong hold during
pressurization and under vacuum
– Easy release handle allows for rapid deflation of the balloon

Product category: Heart circulation diagnostics equipment
Hemostasis Valve Y-Connector
For use during coronary angioplasty procedures, the Y Connector creates a one-way hemostasis valve on the end of a catheter.

Features:
– Easy single-handed opening and closing of the hemostasis valve
– Gentle hemostasis valve allows for easy access and manipulation of interventional devices
– Designed to accommodate up to 9 Fr catheters

Product category: Heart circulation diagnostics equipment
Triple Manifold
Designed to allow for fluid control without connection/disconnection of lines during coronary angiography and angioplasty.

Features:
– Designed to withstand up to 500 psi of pressure
– 2.3 mm inner diameter, which allows for high flow rates
– Clear polycarbonate material allows for improved visibility throughout the procedure
– Designed for one-handed operation

Configurations:
FS-MNTLP : Triple Manifold (Low Pressure)
FS-MNT50 : Triple Manifold (500 PSI)

Product category: Heart circulation diagnostics equipment
Diagnostic Guidewire
Wires used for percutaneous entry and guidance of catheters to coronary or peripheral territories.

Features:
– Engineered with a tapered core that allows for tip flexibility and smooth passage through tortuous anatomy
– PTFE coated wire for reduced friction

Configurations:
Length:
150 cm, 180 cm, 260 cm
Diameter:
.032″, .035″, .038″

Standard Configuration: .038″ x 150 cm [Lowest Lead Time]

Product category: Heart circulation diagnostics equipment
Introducer Needle
Thin walled cannula with a sharp bevel used to puncture skin and gain access to arteries and veins.

Thin walled cannula, which reduces tissue damage during entry and facilitates smooth insertion of the
cannula
– Easy to grip hub
– 18 Gauge x 77 mm Needle

Product category: Catheters / urinary catheters and accessories
Bloodline
Full Arterial and Venous lines to connect a patient to a Dialysis Machine.

Features:
– Tubing made of high-grade bio-compatible PVC material
– Engineered to reduce turbulence within the circuit

Product category: Catheters / urinary catheters and accessories
Infusion Set
A sterile, single use, single chamber IV infusion set for pressure and gravity infusion of fluids.

Configurations:
– Standard configuration is a 135 cm long , non-vented drip chamber with a hyprodermic needle, a roller clamp, and a spike.
– Design can be customized to include other accessories if requested

Product category: Catheters / urinary catheters and accessories
Extension Lines
Used to extend intravenous lines or to attach transfusion sets, syringe pumps, three-way stop cocks, and other accessories that require intermittent injection.

Features:
– Tubing manufactured from medical grade PVC
– ISO 594/1 and ISO 594/2 compliant end connections

Configurations:
– 2 mm and 4mm lines available in any length requested

Product category: Catheters / urinary catheters and accessories
3-Way Stopcock
Used for simultaneous and continuous infusion of two fluids.

Features:
– One male luer lock with rotator and two threaded female ports facilitate safe and secure connection.
– Raised Arrow marks to indicate the direction of flow.
– Low profile for stable & safe positioning on the patient’s body.
– 6% luer taper for compatibility with any standard product.

Product category: Catheters / urinary catheters and accessories
Blood Lancets
Needle used to puncture capillaries and obtain a blood sample.

Features:
– Designed to be compatible with most lancing devices
– Triple Bevel Needle Tip
– Easy twist off cap

Product category: Catheters / urinary catheters and accessories
Nelaton Catheters
A catheter used to relieve pressure in the bladder via urethral catheterization.

Features:
– Radio-frequency smoothed tip to improve insertion comfort
– Heat-punched and polished drainage holes designed to allow the urethral mucosa to easily slide over them without irritation
– PVP Hydrophilic coat [ Clinical trials suggest that this lowers the risk of long-term urethral complications that may be caused by repeated insertions of a non-lubricated catheter ]

Product category: Catheters / urinary catheters and accessories
Suction Catheter
Suction catheters are used to remove bodily secretions from the trachea and bronchial region.

Features:
Smooth catheter surface facilitates easy insertion
– Smooth holes free from sharp edges

Configurations:
Avaialable from size 6F to size 16F

Product category: Inhaler and aerosol appliances
Venturi Mask
An oxygen mask with the connectors that control the concentration of oxygen delivered to the patient.

Features:
Latex free
– Volume controlled design
– Incurved nose seal designed to prevent oxygen from irritating the eyes
– Standard colored valves to control the rate of oxygen delivery

Product category: Inhaler and aerosol appliances
Nasal Cannula
A device used to deliver supplemental oxygen or increased airflow to a patient or person in need of respiratory help.

Features:
– Flow rate of 1 – 4 L/min
– Soft nasal prongs to reduce nasal irritation
– Flexible tube to reduce pressure on the patients’ ears

Product category: Inhaler and aerosol appliances
Bacterial Filter
For use on Anesthized or Repiratory Care patients who require a breathing citcuit

Features:
– Tidal Volume: 150 – 1500 mL
– Dead Space: 25 mL
– Filtration Efficiency: 99.9999%
– Connections: 22M / 15F-22F / 15M
– Gas monitoring connection available

Product category: Inhaler and aerosol appliances
Gas Sampling Line
Gas sampling line used to monitor gas levels.

Features:
– Fits standard luer connections
– Ports made of rigid PVC

ad: contact information