Novacare GmbH

Bruchstr. 48, 67098 Bad Dürkheim
Germany
Telephone +49 6322 9565-0
Fax +49 6322 9565-65
info@novacare.de
http://www.novacare.de

Product Categories

Product categories

01 Electromedical Equipment / Medical Technology
01.09 Hospital equipment, care equipment
01.09.03 Patient lifting systems

Patient lifting systems

04 Physiotherapy / Orthopaedic Technology
04.16 Wheelchairs

Wheelchairs

05 Commodities and Consumer Goods
05.15 Wound care equipment
05.15.11 Decubitus prevention products

Decubitus prevention products
Our products

Product category: Decubitus prevention products
Smartline basic

The Smartline basic mattress system is suitable for the prevention and treatment of pressure ulcers up to grade II according to EPUAP

The novacare® Smartline basic is an overlay system that is placed onto a standard mattress and and is designed for use in home care, care home and hospital environments. It can be used on standard beds, but preferably on hospital or nursing beds.

The system consists of a control unit with a membrane pump and a mattress replacement with 17 nylon/PVC air cells arranged horizontally. The three cells located at the head end are static. The cell unit is equipped with a bi-elastic and watertight but steampermeable wraparound protective cover made from PU. The materials used are biocompatible.

Product details
overlay system to be used with any conventional mattress
bi-elastic protection cover with PU coating, highly breathable, slip-retardant & water repellent
button closures
17 nylon/PVC air cells
CPR emergency ventilation
Transport function with quick connector
membrane compressor
alternating pressure cycle (12 min) & static mode
max.patient weight 20 – 140 kg
Specifications

Control unit
Measurements: approx. 28x16x10 cm
Weight: 1,7 kg
air output: 8 liter/min,
pressure adjustment wheel
power: 230V/50Hz
pressure range: 30-60 mmHg,
cycle time: 12 min

Material

Air cells: 17 Nylon/PVC (No. 6 to 11 cell with low air loss )
Cover: bi-elastic PU coated, breathable, slip-retardant & water repellent
Base: with 4 fixation straps

Product category: Decubitus prevention products
Smartline Plus 5 inch

The Smartline Plus mattress system is suitable for the prevention and treatment of pressure ulcers up to grade III according to EPUAP.

The control units of the Smartline Plus feature the digital pressure sensor technology thus ensuring a silent operation and a long product life.

The compressors switch off when reaching the pre-set system pressure and only re-activate when a cycle change occurs or to adjust the system pressure if necessary.

Product details
overlay system to be used with any conventional mattress
bi-elastic protection cover with PU coating, highly breathable, slip-retardant & water repellent
all-around zipper
17 nylon/TPU air cells
CPR emergency ventilation
Transport function with quick connector
LED weight setting indicator
membrane compressor
alternating pressure cycle (10 min) & static mode
low pressure and power failure alarm (visual and acoustic)
max. patient weight 20 – 160 kg

Specifications

Control unit

Measurements: approx. 28x16x10 cm
Weight: 1.7 kg
air output: 8 liter/min, LED weight setting indicator
power: 230V/50Hz
pressure range: 20-55 mmHg,
pressure sensor inside
cycle time: 10 min

Mattress

Measurements: approx. 200x88x13 cm
Weight: 3,8 kg
CPR valve for emergency procedures, pillow function, transport function with quick connector

Material

Air cells: 17Nylon/TPU (No. 6 to 11 cell with low air loss )
Cover: bi-elastic PU coated, breathable, slip-retardant & water repellent
Base: with 4 fixation straps

Product category: Decubitus prevention products
Smartline Plus 8 inch

The Smartline Plus 8 inch mattress system is suitable for the prevention and treatment of pressure ulcers up to grade IV according to EPUAP.

The control units of the Smartline Plus 8 inch feature the digital pressure sensor technology thus ensuring a silent operation and a long product life.

The compressors switch off when reaching the pre-set system pressure and only re-activate when a cycle change occurs or to adjust the system pressure if necessary.

Product details

mattress replacement system
bi-elastic protection cover with PU coating, highly breathable, slip-retardant & water repellent
all-around zipper
20 Nylon/TPU (cell-on-cell square shape)
CPR emergency ventilation
Transport function with quick connector
LED weight setting indicator
membrane compressor
alternating pressure cycle (10 min) & static mode
low pressure and power failure alarm (visual and acoustic)
max. patientweight 20 – 200 kg

Specifications

Control unit

Measurements: approx. 28x16x10 cm
Weight: 1,7 kg
air output: 8,5-9 liter/min, LED weight setting indicator
power: 230V/50Hz
pressure range: 20-55 mmHg, pressure sensor inside
cycle time: 10 min

Mattress

Measurements: approx. 200x90x20 cm
weight: 7,3 kg
CPR valve for emergency deflation, pillow function, Heel function (5 quick release T-valves for heel cells),
transport function with quick connector

Material

Air cells: 20 Nylon/TPU (cell-on-cell square shape)
Cover: bi-elastic PU coated, breathable, slip-retardant & water repellent
Base: Durable Nylon/PVC 840D with 4 fixation straps

Product category: Decubitus prevention products
Smartline Hybrid

The Smartline Hybrid is a flexible Mattress Replacement System which combines the benefits of high specification foam technology and sensor controlled air pumps.
It is suitable for the prevention and treatment of pressure ulcers up to grade IV (according to EPUAP) and has been specifically designed for patients who are considered to have a very high risk of developing pressure ulcer. In addition, it offers a dynamic therapy support mode. This unique system provides a high degree of patient comfort and when clinically required, can be „upgraded“ into a dynamic mattress system by simply connecting a sensor controlled digital pump. Similarly, mattress function can be „downgraded“ as the patient‘s condition improves in line with their clinical needs.

Embedded in the „U“ -shaped foam base frame are 14 polyurethane air cells with cold foam inserts. The cover is made of multi way stretch PU which is vapour permeable, incorporates high frequency welded seams and has a zip protection flap which makes it conform to the strictest infection policies. Between the cover and cells is a quilted layer comprising of siliconized hollow fibers. The head and foot segments are made of a high quality RG70 cold foam to optimally reduce and redistribute pressure in these vulnerable areas. A higher maximum weight capacity of up to 200 kg also allows the product to meet the needs of plus size patients.

Specifications

Control unit
Measurements: 28 x 16 x 10 cm
Weight: 1.7 kg
Air output: 8 liter / min
Power: 230V / 50Hz
Pressure range: 20 – 55mmHg
Cycle time: 10 min

Mattress
Measurements: 200 x 90 x 16 cm
Weight: 18 kg
Fire resistant cover, quick valve

Material

Cells: 14 cells with polyurethane coating
Head and foot section: Cold foam RG 70
Cover: bi-elastic PU coated, breathable, slip-retardant & water repellent
Basis: Nylon / PVC

Product category: Decubitus prevention products
ASX

The ASX Mattress System is suitable for the prevention and treatment of pressure ulcers up to grade III according to EPUAP..

The control unit of the ASX feature digital pressure sensor technology thus ensuring a silent operation and a long product life. The compressors automatically switch off when the pre-set system pressure is reached and only re-activate when a cycle change occurs or to adjust the system pressure if necessary.

The ASX mattress overlay features nylon / PU cells, eight of which are micro-perforated. The cover is bi-elastic, PU-coated and has an all-round zip. In addition, a double layer base permits the insertion of a safety mattress of up to 5 cm. This feature protects the existing mattress from soiling.

Advantages:

long service intervals
low noise level

Alarmfunctions:

low pressure alarm (visual and acoustic)

Specifications:

Control unit

Measurements: approx. 30 x 18 x 12 cm
Weight:: approx. 2,7 kg

Mattress Overlay

Measurements: 200 x 88 x 13 cm (inflated)
Weight: 5.4 kg (without safety mattress)

18 cells, 3 static head cells (pillow function), 8 cell are micro-perforated, non-bending connecting tubes (incl. transportation safety lock), CPR emergency ventilation

Material

Cells: high-quality nylon PU cell material
Cover: PES polyurethane cover with all-round zip, bi-elastic, breathable, slip-retardant

Product category: Decubitus prevention products
APM 440 plus

Our APM 440 plus Alternating Pressure System is used for the treatment of pressure ulcers up to grade IV according to EPUAP.

The control unit is equipped with a digital sensor control, which regulates the inner pressure of the mattress, creating a perfect surface pressure. The use of two compressors guarantees fast inflation and operation of the mattress.

Adjustment is accomplished with the aid of a touch pad surface, equipped with visually easy to comprehend pictograms. The result is a quick and easy operation.

bi-elastic, breathable PU/PES cover, non-bending connecting tubes, connection coupling with transportation safety lock,
external CPR valve
sensor operated pressure management, automatic key lock, alternating pressure, static and care mode, 3 time cycles with
5/10/15 minute selection
holds up to 230 kg patient weight

Specifications

Control unit

Measurements: approx. 39 x 21 x 12 cm
Weight:: approx. 5 kg

2 membrane compressors, digital control with pressure sensor, alternating pressure, static mode, care mode, 3 time cycles (5/10/15 min.), automatic key lock function (3 min.), low pressure alarm, power failure alarm, set-up memory function.

Mattress Overlay

Measurements (inflated incl. 2 cm mattress base):
200 x 88 x 22 cm
Weight: 12.5 kg

Material

Cells: nylon with polyurethane coating
Cover: bi-elastic PU/PES, breathable, slip-retardant
Base: nylon cover with integrated pocket for 2 cm base mattress
20 cells, 3 head cells static, non-bending connecting tubes (incl. transportation safety lock), self-closing connection valves, CPR emergency ventilation.

Included in delivery:
transport bag for mattress and control unit, foam mattress base with nylon cover.

Product category: Decubitus prevention products
APM bari

Our APM bari Alternating Pressure System is used for the treatment of pressure ulcers up to grade IV according to EPUAP.

Due to the special construction of the mattress, patients weighing up to 280 kg can be supported. The control unit is equipped with the same functions as the successful APM 440 system. Two high-quality full-metal compressors ensure quick inflation and a secure long-lasting operation. The control unit is equipped with a digital sensor control, which regulates the inner pressure of the mattress, creating a perfect surface pressure. The lock-off function ensures a smooth and silent operation between the time cycles.

Additional functions such as care mode, 3 separate time cycles, static mode and an automatic key pad lock complete the fields of application and guarantee a quick and easy operation. The mattress with approx. 120 cm standard width is equipped with 18 nylon / polyurethane cells and specially designed holding straps to safely keep them in place. Each cell is equipped with a CPC quick coupling, permitting an ultra-fast cell exchange / cell removal to freely position the patient within seconds. The holding straps of the cells feature an extremely rugged construction.

Specifications:

Control unit

Measurements: approx. 39 x 21 x 12 cm
Weight:: approx. 5 kg

2 membrane compressors, digital control with pressure sensor, alternating pressure, static mode, care mode, 3 time cycles (5/10/15 min.), automatic key lock function (3 min.), low pressure alarm, power failure alarm, set-up memory function.

Mattress Overlay

Measurements (inflated incl. 2 cm mattress base):
200 x 120 x 24 cm
Weight: 12.5 kg
18 cells, 3 head cells static, non-bending connecting tubes (incl. transportation safety lock), self-closing connection valves to provide zero pressure zones, CPR emergency ventilation.

Material

Cells: nylon with polyurethane coating
Cover: bi-elastic PU/PES, breathable, slip-retardant
Base: nylon cover with integrated pocket for 2 cm base mattress

Product category: Decubitus prevention products
ASX digital 6 inch

The ASX digital 6 inch Mattress System is suitable for the prevention and treatment of pressure ulcers up to grade IV according to EPUAP.

The control unit of the ASX digital features digital pressure sensor technology thus ensuring a silent operation and a long product life. The ASX digital mattress overlay features 18 nylon / PU cells. Three head-cells are static.

The bi-elastic cover is breathable, PU-coated and has an all-round zip. In addition, the sandwich construction permits the integration of a safety mattress of 2 to 5 cm height. The system is suitable for patients from 20 kg up to 200 kg.

Produkt details

Advantages:

touch pad panel (automatic keylock after 3 min.)
care function, 5 heel cells with quick release connectors and self-closing valves
long service intervals
low noise level

Alarmfunctions:

low pressure alarm (visual and acoustic)
power failure alarm

Specifications

Control unit

Measurements: approx. 30 x 18 x 12 cm
Weight:: approx. 2,7 kg

1 membrane compressor, digital control with pressure sensor, alternating pressure cycle (12 min) & static mode, touch pad panel, low pressure alarm (visual and acoustic). Automatic keylock after 3 min.

Mattress Overlay

Measurements: 200 x 88 x 13 cm (inflated)
Weight: 7.2 kg (without safety mattress)

18 cells (Ø approx. 15 cm), non-bending connecting tubes (incl. transportation safety lock), CPR emergency ventilation, 5 heel cells with quick release connectors and self-closing valves for creating pressure free zones in this sensitive area.

pressure free zones in this sensitive area.

Material
Cells: high-quality nylon PU cell material
Cover: PES polyurethane cover with all-round zip, bi-elastic, highly-breathable, slip-retardant

Product category: Decubitus prevention products
LAS 500N Standard

The LAS 500 N standard Therapy System is used for the treatment of pressure ulcers up to grade IV according to EPUAP.

Low-Air-Loss-Therapy
mattress replacement system for low air loss therapy
8 inch TPU cells, two-part with static base
1:3 alternating pressure mode – adjustable in 5 min. intervals
pressure sensor with acoustic and visual alarm
automatic start function
static mode
care mode
pulsation mode
sit-up sensor
automatic key-lock-function (3 min.)
power failure alarm
intelligent fault detection with LED indicator
CPR quick valve
external cell holding, cells with stitched holding straps
rugged base material with holding straps and transport handles
bi-elastic PU protection cover with all-round zipper
transport bag

Specifications

Control unit

Measurements: approx. 39 x 21 x 12 cm
Weight:: approx. 5 kg

2 membrane compressors, digital control with pressure sensor, alternating pressure, static mode, care mode, 3 time cycles (5/10/15 min.), automatic key lock function (3 min.), low pressure alarm, power failure alarm, set-up memory function.

Mattress Overlay

Cells: nylon with polyurethane coating
Cover: bi-elastic PU/PES, breathable, slip-retardant
Base: nylon cover with integrated pocket for 2 cm base mattress

Product category: Decubitus prevention products
Smartmove

Battery Powered Wheelchair Cushion

Wheelchair Cushion

alternating pressure seat cushion
foam-molded seat cushion with 6 TPU cells
bi-elastic PES / PU cover with all-round zip, anti-slip surface

Control Unit

alternating pressure control unit with lithium polymer battery
sensor-controlled, 3 time cycles 10/15/20 min.
static mode
off-grid operation up to 36 hours
low pressure alarm (acoustic and visual)
carrying bag for wheelchair attachment
external battery charger (UK/EU)
Specifications

Control unit

Measurements: approx. 21 x 9.5 x 6 cm
Weight:: approx. 0,64 kg

Wheelchair Cushion

Measurements: 47 x 47 x 10 cm
Weight: 1.6 kg

Material

Cells: TPU cell material
Cover: Polyester PU coated, bi-elastic

Product category: Wheelchairs
VarioXX lightweight aluminum wheelchair

The lightweight wheelchair VARIO XX² , a model that combines the highest quality, comfort and attractive design with a technically fascinating new development, a variable seat width adjustment from 38 to 51 cm and a seat height adjustment of 47 to 52 cm.

The adaptable model for almost all patient needs
Lower stocks of various seat widths
100% re-useable
save on unnecessary journeys through on-site adaptation
simple seat width, height and depth adjustment to suit patient needs
durability and quality tested

Standard version includes:

adjustable backrest webbing
folding backrest
assistant brakes
occupant brakes
quick release axles
armrest desk/short, removable, swing-away
fold-back, angle adjustable foot-plate with heel strap
reinforced aluminium frame
ISO 7176-19 Crash Tested – Approved for patient transport in a vehicle
height-adjustable push handles
anodised aluminum handrims
puncture proof tyres
passive lighting
lap-strap

Optional extras include:

height adjustable armrests
angle adjustable legrests
assistant drum brakes

Specifications:

Seat width: 38 – 51 cm
Seat depth: 42 cm
Seat height: 47 – 49 – 52 cm
Backrest height: 42 – 44 – 46 cm
Armrest height (from seat cushion): 23 – 24 – 25 cm
Length: 103 cm
Height: 99 – 103 cm

Product category: Patient lifting systems
ProLift Argo

The lightweight aluminium sit-to-stand hoist.
The ProLift Argo is one of the lightest and most compact mobile aluminium sit-to-stand hoists lifting patients from a sitting to a standing position. The well thought-out design guarantees maximum support. The ProLift Argo permits a more active patient mobilization – according to their individual abilities.

The undercarriage can be spread to accomodate armchairs or nursing chairs. Attaching the Standsupport Sling is easy and carried out within seconds. The lifting process is smooth and gentle.

Specifications:
Hoisting capacity: 220 kg
Weight: 36 kg

Total width and length undercarriage
Width: 670 mm
Length: 935 mm
Material: Aluminium
Wheel diameter: 75 mm

Emergency Lowering Function
manual & electric

Accessories

Wall mounted battery chargers

Product category: Patient lifting systems
ProLift A 222

The lightweight aluminium hoist for hospital care.
The lightweight aluminum hoist ProLift A 222 is the perfect hoist for hospital care. With a weight of only 40.5 kg, the ProLift A 222 features a hoisting capacity of up to 220 kg. The hoist features the same strong hoisting motor L34 as the A 166. In addition, it has a second motor for spreading of the chassis.

Due to its standard „care electronics“, the battery is generally equipped with a quick-change system. Furthermore, the electronic system allows operating the hoist with two different speed variations.

Specifications:
Hoisting capacity: 220 kg
Weight: 40.5 kg
Hoisting height: 451 – 1865 mm

Total width and length undercarriage

Width: 740 mm
Length: 1200 mm
Material: Aluminium
Wheel diameter: 75 mm

Emergency Lowering Function

manual & electric

Accessories

Single sling bar 370 mm
Single sling bar 731 mm
Double sling bar 632 mm x 432 mm
Double sling bar 731 mm x 531 mm
Wall mounted battery charger
Patient class 3 weighing scale
Range of ProLift slings
Walk support handle-bars

ad: contact information

About Us

Company data
Foundation

1993

ad: company

Nordiska GmbH & Co. KG
NordStone International Trading & Businessservice GmbH
Nortal GmbH
Ophardt Hygiene-Technik GmbH & Co. KG
OPTIMA automation GmbH
OPTIMA life science GmbH
Nortal GmbH
NordStone International Trading & Businessservice GmbH
Nordiska GmbH & Co. KG
Norav Medical GmbH
Norafin Industries (Germany) GmbH

Ophardt Hygiene-Technik GmbH & Co. KG
OPTIMA automation GmbH
OPTIMA life science GmbH
Optiplan GmbH
Optoflux GmbH