Medical Products Supplies Companies

33-3 Karahashi-keiden-cho Minami-ku, 601-8454 Kyoto
Japan
Telephone +81 75 6612931
Fax +81 75 6612937
yasuhiro-nakagawa@futaku.co.jp
https://futaku.co.jp/en/

Product Categories

Product categories

02 Manufacturing of finished products
02.05 Needles

Needles

Metal Needle (β-titanium needle with lure-lock)
Needle Tip Shape

04 Manufacturing equipment
04.04 Laser processing equipment

Laser processing equipment
Our products

Product category: Needles
Metal Needle (β-titanium needle with lure-lock)
The material of a needle part is a seamless pipe of titanium-alloy DAT51 (Ti-22V-4AL).
β-titanium has higher corrosion-resistivity and rigidity than SUS, and non-magnetization property.
The Minimum inner-surface roughness is about 0.1 μm (Ra 0.1), resulting less flow resistance and excellent liquid draining.
Lure lock part is made of pure titanium, and the standard length of needle part is 13 mm.

Product category: Needles
Needle Tip Shape
Lancet cutting / obliquely cutting
Lancet cutting can be applied to an injection/aspiration needle with its small puncture resistance.

Three-side cutting with horizontal-holes
having horizontal holes, protecting the needle from penetration of rubber-plug shavings. With oblique holes instead horizontal ones, specimen can be sucked until the very little residue left.

Conical shape / Four long-holes with round shape
The picture on the left is a sample with conical shape tip.
The picture on the right is a sample that is covered by welding at the tip with four long-holes.

Micro side mirror / For reducing liquid residue
The needle end is welded with a tip part having a slant cross-section, so that the needle have no dead-volume.

Hybrid pipes comprising dissimilar materials
he hybrid pipe is made of stainless pipe with PEEK inside it, having a conical shape tip.

ad: contact information