Postfach 501260, 50972 Köln
Zum Engelshof 1, 50996 Köln
Germany
Telephone +49 221 350170
Fax +49 221 3501715
info@lautenschlaeger.net
http://www.lautenschlaeger.net
Product Categories
Product categories
01 Electromedical Equipment / Medical Technology
01.10 Hygiene / sterilisation / disinfection
01.10.01 Sterilisation equipment, disinfection equipment and accessories, autoclaves
Sterilisation equipment, disinfection equipment and accessories, autoclaves
Our products
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves
ProtoCERT
The compact device for health care centers and the OPD
A high pressure steam sterilizer for the sterilization of firm and porous goods at 121°C and 134°C according to EN 285 with a capacity of one sterilization unit (1 StU)
The ProtoCERT 700/1400 is the compact sterilization system for health care centers, an outpatient department or the surgical ward. With its extremely low space requirement, shortest cycle times and highest Standards in maintainability and user friendliness, this sterilizer is designed for maximum performance and reliability as well as minimum operating and life cycle costs. Available either as single door unit or as double door unit to separate packing zone and sterile zone – both with integrated pure steam generator and, if desired with water purification system.
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves
ZentraCERT
… for the central sterilization department
A high pressure steam sterilizer for the sterilization of firm and porous goods at 121°C and 134°C according to EN 285 with capacities from 2 to 12 sterilization units (2-12 StU)
The ZentraCERT is the steam sterilizer for the central sterilization department in hospitals or laboratories with an ergonomically designed loading level of 85 cm. A wide range of types, high performance process technology and equipment as well as intelligent accessories guarantee optimum safety and reliability.
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves
MagnoCERT
… for highest capacities in hospital and industry
A high pressure steam sterilizer for the sterilization of firm and porous goods at 121°C and 134°C according to EN 285 with capacities from 6 to 24 sterilization units (6-24 StU).
The MagnoCERT is the steam sterilizer for the large scale sterilization facility in hospitals or industry, particularly suitable for central service providers with more than one client. At least three loading levels, highest reliability and innovative process technology guarantee minimum cycle times and maximum performance.
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves
DesCERT
… for preventive infection control
A high-volume steam disinfector for solid and porous goods like mattresses, clothing, blankets, pillows and utensils at 75°C and 105°C with capacities from 5 to 10 sets of bed equipment (5-10 BA).
The DesCERT is a multi-purpose steam disinfector for highly reproducible and safe disinfection control in Hospital bed cleaning departments and in industry. A flexible loading system, high performance process technology and innovative accessories guarantee low cycle times, optimum Efficiency and highest profitability. The DesCERT is a medical device according to 93/42/EEC and marked with CE 0197.
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves
Lautenschläger DMA
Lautenschläger DMA
The integrated process control and electronic Bowie-Dick TestThe Lautenschläger steam analyzer (DMA) detects steam penetration failures caused by leakages, insufficient air removal and non-condensable gases entering the chamber together with the steam. Developed for batch and cycle control and as an integrated electronic Bowie-Dick Test to assure highest sterlization safety and optimum economic efficiency.
Failure warning system “DMA FW”
The DMA analyzes the composition of the chamber atmosphere and works as a failure warning system for cycle control purposes. It is usable as a process challenge device (PCD) acc. to EN ISO 17665 and it meets the requirements of an Air Detector acc. to EN 285. Individually calibrated for each sterilizer, the DMA reaches excellent accuracy and reproducibility – the reliable, user-friendly and cost-efficient alternative to a classic chemical indicator system. Additional cycle control systems are no longer necessary.
Steam penetration test “DMA BD”
The module BD upgrades the DMA to fulfil the demands of an alternative Bowie-Dick Test acc. to EN ISO 11140-4. With this module integrated in your Lautenschläger sterilizer, the daily Bowie-Dick Test no longer requires the standard test pack or any other alternative indicator system.
Easy handling and fully automatic documentation – as soon as you start a test or a production cycle the sterilizer automatically starts the corresponding measuring module. The system evaluates the measuring and prints the results on the cycle documentation protocol – either on the local printer or in combination with an integrated instruments tracking software solution.
Precise evaluation without risk of misinterpretation – the DMA produces clear and unequivocal measuring results: passed or failed – without any subjective interpretation or vague measurig results.
Highly accurate sterilization control with early warning system – alarm limits are individually adjusted to the sterilizer type and chamber size. Together with its highly precise measuring system and its outstanding reproducibility the DMA is able to detect lowest concentrations of non-condensable gases – far below concentrations which would cause a Bowie-Dick test failure. This enables the DMA to work as an early warning system and to significantly reduce unscheduled sterilizer shut-down periods.
A measuring device for the whole sterilizer lifetime – the DMA is designed to work with your sterilizer over its whole lifespan. DMA inspection and re-calibration are part of the yearly sterilizer maintenance service.
Time and cost advantage – no consumables, lowest possible time and effort for the measuring itself and for the evaluation, documentation and archiving of the results – the DMA is the cost-efficient solution for an integrated cycle control system.
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves
Washing and Disinfection
Washer-disinfectors (WDs) are used for an automatic and reproducible cleaning, disinfection and drying of reusable medical devices, utensils and of laboratory equipment. Lautenschläger works close together with the Italian specialist in washing and disinfection technologies SMEG.
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves
Electrical Steam Generators
Electrical steam generators for optimum pure steam quality
The Lautenschläger series ED 15-144 offers heating capacities from 15 to 144 kW. All units may be operated without permanent supervision: ED 15 and ED 36 acc. to PED 2014/68/EU category II, ED 72 and ED 144 acc. to category III. The steam generators are equipped with durable resistive heating elements with internal over-temperature protection, with circuit breakers for fail-safe disconnection and with automatic water level control and integrated water shortage protection.
Individual configuration
For an integrated CSSD or laboratory installation, steam headers for the connection of multiple sterilizers in parallel are available. Steam and energy management systems among others include controlled feed water supply, the remote-controlled shut-off of heating circuits to avoid electrical peak demands, an automatic switch-over from steam generator production to house steam supply and recovery devices for pipe and heating jacket condensate.
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves
Steam Converters
Steam converters for the production of pure steam
The Lautenschläger WT series – steam converters for the production of pure steam for sterilization and disinfection from heating steam with capacities from 54 kW to 300 kW. The units are made from high-grade stainless steel and equipped with stainless steel heat exchanger elements – the WT 54 uses 6 separately replacable cartridges, all other types are designed as shell tube evaporator with a removable stainless steel heat exchanger bündle.
Individual configuration
For an integrated CSSD, laboratory or industrial installation, steam headers for the connection of multiple sterilizers in parallel are available. Steam and energy management systems among others include controlled feed water supply, an automatic switch-over from steam generator production to house steam supply and recovery devices for pipe and heating jacket condensate.
ad: contact information
About Us
Company data
Foundation
1888
Area of business
Electromedical equipment / Medical Technology
Laboratory Equipment
ad: company
Excelitas Technologies GmbH & Co. KGEXMI Technology GmbH
EZM Edelstahlzieherei Mark GmbH
F. H. Papenmeier GmbH & Co. KG
Fachhochschule Dortmund
Fachpressestand/Trade Press Stand – Messe Düsseldorf GmbH