Medical Products Supplies Companies

Karola Olszewskiego 6, 25-663 Kielce
Poland
Telephone +48 79 1369777
office@cabiomede.com

Zaawansowane usługi inżynierii medycznej dla weterynarii

Product Categories

Product categories

07 Medical Services and Publications
07.17 Other medical services and publications

Other medical services and publications

Our products

Product category: Other medical services and publications
Custom-made implants
We offer custom-made bone implants that are prepared in 3D printing technology from certified biocompatible materials. Implant preparation is a multistage process that includes:

1. Providing computed tomography results
The results of computed tomography should be provided along with the remaining necessary medical documentation.

2. Consultation with the main doctor
Implants are created individually and each of them is created in close cooperation with the patient’s doctor to ensure the best possible results.

3. Development of a implant’s model
The next step is to prepare the implant geometry. It is based on the results of computed tomography. A visualization of the affected bone and the implant are created. Depending on the complexity of the future implantation surgery, anatomical models and individual tools such as surgical templates can be also created at this stage.

4. Consultation of the implant’s geometry and its acceptance
The final design of the implant in the form of a computer model and other documentation are presented to the main doctor in order of project approval. At the client’s request, we also offer the preparation of the implant prototype as an additional form of visualization.

5. Implant preparation
The implant is made in 3D printing technology from certified biocompatible materials. The finished product is sterilized and delivered to the client in a sterile form, which saves time during preparation for surgery.

Product category: Other medical services and publications
Surgical giudes
Surgical guides are an irreplaceable help in the surgical procedures planning process. They allow to significantly reduce the duration of the surgery itself. Guides are made individually based on the results of computed tomography.

The doctor who is making an order is always involved in the surgical guide designing process. This allows to present surgeon’s needs and to explain the course of the surgery to the lead engineer. On this basis, the engineer creates a design of a guide that is approved by the surgeon.

Guides are manufactured in 3D printing technology that ensures its high precision and quality of preparation. They are produced from biocompatible materials that are allowed for contact with body fluids. The final product is delivered in a sterile form, which allows its use during surgery without any additional preparation.

Product category: Other medical services and publications
Indyvidual Anatomical Models
Anatomical models are of great help for specialists from field of surgery and orthopedics. They allow precise planning of complicated medical procedures. Anatomical models can also help doctor explain reasoning behind need for medical procedures to clients. Models of anatomical structures – both pathological and healthy – can serve for educational purposes.

We offer preoperative anatomical models based on medical imaging – CT scan – or pre-made STL model files. We prepare our models according to rigorous standards offering high quality of materials and manufacturing. In process of manufacturing we use various 3D printing techniques, witch allow us to offer technology best suited for our client individual needs.

In case of individually prepared models for medical procedure planning we consult whole process with medical professional, to offer most optimal technology and best model quality.

Anatomical models are irreplaceable help during process of surgical planning and preparation for complicated procedures such as: corrective osteotomy, spinal surgeries or comminuted fractures of long bones (in case of witch getting optimal bone chip placement is crucial). Accurate operation planning and its practice allows shortening of overall surgery time by 30%.

The anatomical models we offer can be divided into 3 groups that are presented below. Each group is characterized by used material, quality of the final product’s surface finish.

Basic quality: Anatomical models prepared in basic quality are great solution for surgeons who want to plan and practice the route of a surgery. The technology in which these models are created has an accuracy of approx. 0.2 mm. The used material is polystyrene.

High quality: Models of this quality are recommended as pre-surgery models and educational models. The materials used to produce high-quality models are polyamides. The technologies of producing this type of models allows to obtain an accuracy of up to approx. 0.1 mm.

Very high quality: The advantage of high-quality models is their transparency which makes the internal anatomical structures visible. The material used in this type of models is epoxy resin. The manufacturing technology has an accuracy of approx. 0.05 mm.

Product category: Other medical services and publications
X-Ray Callibration Marker 25mm
Successful pre-operative planning based on X-Ray imaging require assortment of correct scale ratio. X-Ray Marker was developed specifically for this purpose: with calibration ball of consistent size and wide positioning range. By placing calibration ball inside X-Ray photograph frame surgeon can easily asses correct scale ratio and real sizes of examined anatomies. Knowledge of correct scale ratio is crucial for pre-operational planning of procedures such as: TTA and TPLO, providing way to match correct implant size.

Calibration marker is available in 3 variants: fixed to tabletop, on portable stand and on magnetic plate.

Product category: Other medical services and publications
Anesthesia Tree
Anesthesia tube holder provides an easy and quick positioning of anesthetic tubing and wiring during medical procedures. It allows safe cables management preventing unintended cable move-ments. Tube holder serve as an excellent addition to inhalation anesthesia equi-pment.

Thanks to wide range of positio-ning possibilities, holder improves execution of medical procedures and helps to maintain order inside the operating room.

Product category: Other medical services and publications
Wall Organizer – Endotracheal Tubes
The wall organizer allows convenient storage of the endotracheal tubes in sizes from 2.5 to 10.5 mm. The main features of the accessory:

Tubes grouped in sizes in the event of an emergency.
Easy wall mounting.
Design ensuring secure placement of stored tubes.
Made of stainless steel, providing resistance to external factors and disinfectants.

Product category: Other medical services and publications
Prototyping
We offer rapid prototyping services using many 3D printing technologies. The prototypes we create allow you to optimize the shape of the product and carry out strength tests, which in turn allows you to verify the results obtained from computer analyzes. We also offer preparation of 3D printouts of designed solutions at subsequent stages of work on the project. It allows the customer to contact not only flat technical documentation, but also a tangible prototype that accurately reflects the look of the final product.

CABIOMEDE is the Operator of the 3D KPT Printing Center.

Product category: Other medical services and publications
Computer Aided Design (CAD)
We offer CAD design services for the medical, rehabilitation, veterinary and sports industries. We specialize in designing custom-made products that are fully tailored to the individual requirements of future users.

Product category: Other medical services and publications
Finite Element Analysis (FEA)
We carry out static and dynamic strength analysis of MES. These analyzes allow testing the strength of even very complex shapes and structures. The simulation is carried out in conditions reflecting the real load of the product, which will occur during its use. This enables accurate testing of the product, without the need to build a prototype or before it is done, which significantly streamlines the design process.

Product category: Other medical services and publications
Wheelchairs for animals
We offer ultralight and modern wheelchairs for animals, designed mainly for dogs and cats. Our solution is prepared according to the individual needs and measurements of the pet, which provide excellent fit and high comfort of use.

The advantages of our wheelchair:

Custom-made shell
The wheelchair’s shell is prepared in 3D printing technology and its shape is custom-made. It is also made of materials intended for contact with the skin to ensure comfort and prevent irritation. These features guarantee a unique fit to animal’s anatomy and high comfort of use.

Durability and lightness
The wheelchair’s construction provides ease of assemble and the ability to adjust the shell height and position of the wheels. Carbon profiles guarantee the low weight and high durability of wheelchair’s construction.

Safety, stability, speed
Shock-absorption provided by the optimized wheelchair design and used materials. Speed provided by the high-quality wheels and bearings. Stability and safety provided by the back supports and bumpers.

Ease of adjustment
The construction of the wheelchair ensures ease of assembly and the ability to adjust height of the shell and position of the wheels. That provides anatomical and the most comfort position for the animal.

Healthy spine
The harness, that connects the animal with the wheelchair, prevents stretching of the thoracic spine and ensures even distribution of the load. Low weight resulting from the construction of the wheelchair and the use of light and durable materials such as carbon fiber and aluminum protects animals against joints and spine overload.

Product category: Other medical services and publications
Orthoses for Animals
We offer orthoses for Forelimbs and Hind limbs.

CABIOMEDE orthoses are an excellent solution for animal limbs requiring stabilization and protection during rehabilitation and recovery period. They can also be used in the case of animals with limb spasticity problem.

Orthotics are made of biocompatible and allowed for skin contact materials, which make them safety for use also during wound healing process. They consist of a polymeric external stabilizer, soft foam liner and non-slip pad. Orthoses provide stabilization in the wrist area and full support for the limb as they extend under the paw.

They keep the limb in a natural position and allow to unburden the limb during walk. An additional advantage of our orthoses is the possibility of heating them and refitting on the animal’s limb, which is very important, for example in the case of a reduction in postoperative swelling.

Orthotics are available in sizes XXS to XL.

Product category: Other medical services and publications
Face Protector – Sports Mask
Sports protective masks are used in both prevention and during the treatment of face injuries. The mask is providing full protection of the exposed parts of the face and allows you to practice sports freely.

Every mask is an individual project which is based on 3D scans of customers face or computed tomography. This ensures a perfect fit and the comfort of use that is unachievable in the case of serial products.

Product category: Other medical services and publications
Hand Protectors
Hand protectors are intended for use during treatment of hand and wrist injuries.

They are available in the basic version – intended for everyday use and in the sport version – with increased durability allowing for active sporting activities. Each protector is made individually from thermoplastic materials, which are shaped directly on the patient’s limb. This guarantees a high comfort of protector use.

An additional advantage of protectors is the possibility of their heating and re-fitting, for example in the case of a reduction in swelling within the injury. Protectors are made of materials that are fully biocompatible and approved for skin contact.

Product category: Other medical services and publications
Shin guards
We have created individually designed football protectors. They are designed based on 3D leg scans. The shell of fenders is created in the 3D printing process from high-strength materials. Each protector is padded with foam absorbing and absorbing the impact force. The individual shape of the protector guarantees significantly higher comfort during its use compared to serial products.

Protectors are in line with European Standard 13061 regarding shock absorption and shell strength.

ad: contact information

About Us

Company details
Since 2016, CABIOMEDE has been providing access to advanced research and development services for companies in the medical and veterinary industries. Thanks to our services, companies gain technological background to optimize their products and search for new solutions, which is expected by the dynamically developing medical market.

In our work we combine engineering design, numerical analysis and rapid prototyping technologies. We want to increase the quality of products available on the market by providing innovative solutions supporting the development of high medical technologies. For this reason, we constantly cooperate with the best specialists and numerous research centres.

ad: company