Medical Products Supplies Companies

Via dell’Industria, 49, 48014 Castel Bolognese (RA)
Italy
Telephone +39 0546 656845
Fax +39 0546 54706
deas@deasnet.it

Home

Product Categories

Product categories

01 Electromedical Equipment / Medical Technology
01.06 Intense medicine / anesthesiology / respiration
01.06.01 Anesthesiology equipment, anesthesiology systems

Anesthesiology equipment, anesthesiology systems

01 Electromedical Equipment / Medical Technology
01.06 Intense medicine / anesthesiology / respiration
01.06.02 Respiration equipment, oxygen equipment

Respiration equipment, oxygen equipment

Bronchial Tubes
Endoscopic Mask
Laryngeal Masks
Tracheal Tubes

01 Electromedical Equipment / Medical Technology
01.06 Intense medicine / anesthesiology / respiration
01.06.07 Other equipment for intense medicine / anesthesiology / respiration

Other equipment for intense medicine / anesthesiology / respiration

Aerosol and Oxygentherapy
Full-face and nasal masks for NIV
Heated Breathing Circuits
Humidification Chambers

Our products
Product category: Respiration equipment, oxygen equipment
Bronchial Tubes
Features

Made of thermosensitive PVC to ensure high flexibility of the tube, and to perfectly fit to the airways
Lengthwise radiopaque line
15M connector
Graduation marks at each cm
Bronchial and tracheal high volume low pressure cuffs
Colour-coded piloting balloons with Luer Lock connector
Made of thermosensitive PVC to ensure high flexibility of the tube, and to perfectly fit to the airways
Atraumatic, gently rounded tip
Single use
Latex and DEHP Free
EO Sterile

DEAS bronchial tubes are designed for selective single lung ventilation. They are available in both left and right-side types in sizes from 26 to 41 Fr and supplied in a ready to use system including:

one stylet to maintain the shape of the tube
two double swivel elbow connectors, 22M-15M, with cap for suctioning or bronchoscopy
one Y piece connector with 15M-15F connections
two suction catheters with vacuum control connector.
Product category: Respiration equipment, oxygen equipment
Endoscopic Mask
Features

Flexible and Expandable Membrane Adjusts to different sizes of endoscope tube to minimize air leakage while allowing easy insertion for an endoscope tube.
Transparent Mask Body Easy for visual inspection to monitor patient’s condition.
Resealable Port Cap Maintains the air seal when endoscope is not used.
Single Patient Use Minimizes the risk of cross contamination.
Standard 22F Connection Port Enables connection to tubing or connector.
CO2 or Pressure Monitoring Port 4.0 mm O.D. port for pressure or CO2 monitoring.
Soft Mask with Volume-Adjustable Air Cushion Enables adjustment of air volume in the air cushion to provide better comfort and seal.

A revolutionary mask that enables endoscopy during anesthesia or mechanical ventilation.

DEAS Endoscopic Mask is specifically designed with a flexible port positioned in an ideal part of the mask to make nasal or oral insertion of endoscope tube easier for clinicians.
Product category: Respiration equipment, oxygen equipment
Laryngeal Masks
Features

Made of soft, thermosensitive material, for an atraumatic insertion and patient comfort.
Aperture bars to prevent blockage of the ventilation lumen from the epiglottis.
Inflation line separate from ventilation tube for better handling.
15M connector.
Pilot baloon with self-sealing inflation valve and cuff deflator.
Ventilation tube clearly marked with all essential information: mask size, patient’s weight and cuff inflation volume.
Seven different sizes from newborn to adult
Latex and DEHP Free
EO sterile.

DEAS laryngeal masks are available in both single use and autoclavable types and with metallic reinforcement for ENT, dental and ophthalmic surgery.
Product category: Respiration equipment, oxygen equipment
Tracheal Tubes
Features

Made of thermosensitive PVC to ensure high flexibility of the tube, and to perfectly fit to the airways
Magill shaped body as per ISO/EN standards
Graduation mark at each cm
Longitudinal radiopaque line
Low pressure, high volume cuff, with thin, delicate walls, ensures effective seal and minimizes the risk of trauma to the airways
Cutting short marker
Murphy eye smoothly formed
Atraumatic, rounded tip
15M connector
Single use
Latex and DEHP Free
EO Sterile

DEAS offers an extensive range of tracheal tubes to meet the needs of a variety of patients from infants to adults and for different procedures. Also available:
Reinforced: designed to reduce the risk of kinking and to conform to patient position;
Preformed: for ENT, ophthalmic and dental surgery.
For long-term intubated patients, we provide a tracheal tube with a second lumen opening above the inflatable cuff. This allows subglottic secretion drainage which helps reduce the risk of VAP infection.
Product category: Other equipment for intense medicine / anesthesiology / respiration
Aerosol and Oxygentherapy
Features

Adult and child models
Clear, see-through material
Ergonomic design
Smooth contoured edges
No-crush starlumen tubing with standard connectors
Single use
Latex Free
DEHP Free
Smooth contoured edges
No-crush Starlumen tubing
Aluminium strip
Standard

A wide range of oxygen and aerosol therapy devices for both hospital and home use, including nebuliser kits, oxygen masks, aerosol masks, tracheostomy masks, mouthpieces, oxygen tubing, oxygen connectors, T-pieces and air-entrainment masks with multiple color-coded Venturi connectors to set the desired oxygen concentration (FiO2) from 24 to 60%.
DEAS nebulizers produce a laboratory proven aerosol particle size with a Median Mass Aerodynamic Diameter (MMAD) lower than 5 microns.
DEAS aerosol and oxygen masks are elongated, completely transparent with moulded atraumatic contours and a flexible aluminium strip to assure a smooth fit over any nose.
All products come in sealed plastic bags, non sterile, but can also be supplied in PE/paper pouches, sterile, for a safer use.
Product category: Other equipment for intense medicine / anesthesiology / respiration
Full-face and nasal masks for NIV
Features

Soft and smooth inner layer provides patient comfort and excellent airtight seal around the inhalation area
Contoured forehead support greatly reduces pressure to the nasal area
Clear mask allows a good view of mouth and nasal area
Low dead space results in low CO2 build up
Includes headgear with Velcro fasteners that provides maximum versatility and movement
Air pressure and O2 supply port
Autoclavable or single patient use
Available with or without air vents and anti-asphyxia valves
Latex Free
Phthalates Free

DEAS offers an extensive portfolio of high quality and cost effective non-invasive ventilation masks, in different models and sizes, to meet any clinical need and to enhance patient comfort.
The non-vented masks are designed to be used on ventilators with an active exhalation system or in conjuction with breathing circuits that have an intentional leak valve. The vented masks are compatible with ventilators without an active exhalation system, and have a built-in expiratory port that provides adequate CO2 wash-out.
Product category: Other equipment for intense medicine / anesthesiology / respiration
Heated Breathing Circuits
DEAS heated breathing circuits are available in a variety of configurations, with or without autofeed humidification chamber, and in three sizes (adult, pediatric and infant) to accommodate any clinical need.

DEAS offers a complete range of phthalates free smoothbore breathing circuits with single or dual heated wires for any kind of ventilator and active humidifier for hospital and home use.
DEAS heated breathing circuits are available in a variety of configurations, with or without autofeed humidification chamber, and in three sizes (adult, pediatric and infant) to accommodate any clinical need.
All products are also available in sterile packaging.
Special custom-made configurations may be designed. OEM and OBL services are also available.
Product category: Other equipment for intense medicine / anesthesiology / respiration
Humidification Chambers
Features

Made of translucent material with clear markings for an easy visualization of the water level.
The aluminium heat plate has been designed to direct the heat transfer into the chamber water by insulating the circumference. Prevents heat loss, results in higher humidification, and revents user burns when removing after use.
22 mm connectors with baffles for optimized surface vaporization.
Protective cover to avoid contamination and to conveniently store the fill set before use.
90 cm feeding tube with hydrophobic filter allowing connection to a rigid water reservoir.

Designed to be used with the following humidifier models:
DEAS Hydraltis 9500neo, DEAS Hydraltis 9500FM, Fisher & Paykel® HC500, MR410, MR700, MR720, MR730, MR810, MR850, WilaMED PMH5000, AIRcon.

ad: contact information

About Us

Company details
DEAS has been developing breathing solutions for respiratory care since 1987.

Our products are used in Operating Rooms, Anaesthesia, Intensive Care Units (ICU), Neonatal Intensive Care Units (NICU), Coronary Care Units (CCU), Post-Anaesthesia Care Units (PACU), Respiratory Therapy (RT), Emergency Rooms (ER).

Our catalogue includes:

nebuliser kits, oxygen masks and aerosol masks for aerosol and oxygentherapy
tracheal tubes, bronchial tubes, laryngeal masks, and stylets for airway management
Breathing Systems: breathing circuits, catheter mount and connectors, filters and HMEs, anaesthesia face masks, manual breathing units, reservoir bags
NIV masks
tracheal suction catheters and closed suction systems
endoscopic mask
gas sampling devices
breathing exercisers
fixation devices

DEAS provide, even in OEM, product design and engineering, prototypation, qualified plastic materials selection, product technical file, risk analysis, instructions for use redaction, CE certification and marking, mould design and construction, injection and blow moulding, extrusion, clean room assembly, bonding, blistering and packaging, EO or Gamma sterilization, stocking.

DEAS distributes through a network of partners worldwide. We have gained a reputation as a responsive company and many products in our range have been developed as a result of end user requests.

Customer service has always been paramount, with customers receiving prompt responses to all requests for product, technical assistance, and business support.

Our production facilities, offices and warehouse are located in Castel Bolognese, Italy.

ad: company