Anyangpangyo-ro, 221 Cheonggye Plaza 5th Floor, 16009 Uiwang-si
Korea, Republic
Telephone +82 31 421 9700
Fax +82 31 421 9911
admin@cu911.com
http://www.cu911.com/
Product Categories
Product categories
01 Electromedical Equipment / Medical Technology
01.04 Therapy and physical medicine
01.04.03 Emergency cardiac therapy equipment
Emergency cardiac therapy equipment
6 Products
01 Electromedical Equipment / Medical Technology
01.07 Emergency medicine, rescue equipment
01.07.03 First-aid equipment
First-aid equipment
01 Electromedical Equipment / Medical Technology
01.10 Hygiene / sterilisation / disinfection
01.10.01 Sterilisation equipment, disinfection equipment and accessories, autoclaves
Sterilisation equipment, disinfection equipment and accessories, autoclaves
01 Electromedical Equipment / Medical Technology
01.10 Hygiene / sterilisation / disinfection
01.10.06 Air processing systems, air purification systems, disinfection systems
Air processing systems, air purification systems, disinfection systems
01 Electromedical Equipment / Medical Technology
01.10 Hygiene / sterilisation / disinfection
01.10.11 Other equipment for hygiene / sterilisation / disinfection
Other equipment for hygiene / sterilisation / disinfection
04 Physiotherapy / Orthopaedic Technology
04.04 Walking and mobility aids
Walking and mobility aids
04 Physiotherapy / Orthopaedic Technology
04.12 Rehabilitation equipment and devices
Rehabilitation equipment and devices
Our products
Product category: Emergency cardiac therapy equipment
LifeGain CU-HD1 Defibrillator Monitor
Professional use bi-phasic defibrillator for hospitals and emergency responders.
Includes AED, manual defibrillation, NIBP, SpO2, pacer, thermal printer, and 12 lead analysis options.
CE certification.
Product category: Emergency cardiac therapy equipment
iPAD CU-SP1 AED
Allows the use of common pads for adults and pediatric patients. LCD screen allows to check the remaining battery level and pads status. The device adjusts the voice prompt sound level automatically according to ambient noise.
Fully auomatic / semi-automatic versions available.
CE certification.
Product category: Emergency cardiac therapy equipment
iPAD CU-SP2 AED
Light weight and portable professional AED / defibrillator. Allows for automatic and manual defibrillation.
LCD screen supports 3 lead analysis. External Bluetooth printer allows for data record.
CE certification.
Product category: Emergency cardiac therapy equipment
iPAD CU-NF1200
Approved by FDA in 2008 (first in Korea), supports voice prompt and CPR guidance. LED light indicator for pads and device status.
CE certification.
Product category: Emergency cardiac therapy equipment
CU-SPT Trainer
Product category: Emergency cardiac therapy equipment
CU-NFT Trainer
Trainer unit for the CU-NF1200 AED.
Product category: Sterilisation equipment, disinfection equipment and accessories, autoclaves, Other equipment for hygiene / sterilisation / disinfection
HWM HPS-100 Plasma Sterilizer
– Easy to install
Simply plug into a standard 220v outlet and your HPS series sterilizers are ready to go. You won’t need
additional facilities such as compressed air, drainage system, ventilation system.
– Easy to use
You can start/cancel/control the sterilization process by simply pushing navigation buttons.
The selected sterilization cycle will be progressed automatically and you can monitor relevant
information such as sterilization conditions, progress status, error messages from the display.
– Self-test features
When malfunction occurs during operation, an error code is displayed by self-test feature and the running sterilization cycle is interrupted automatically for safety.
– Automatic notification system for regular maintenance
Your HPS series sterilizer will automatically notify you the replacement period of consumables such as pump oil, air filter and so on. After 250 cycles of sterilization, a warning message to change oil will be displayed and your sterilizer will stop working when reaches 300 cycles without change of oil to prevent equipment failure.
– Validation of Sterilization of HPS-100
A PCD(Process Challenge Device) in accordance with EU standards(EN 867-5) is used for the validation of sterilization of HPS-100 series sterilizers at the most difficult positions inside of the sterilization load so that the most challenging medical instruments including dead-end lumens can be sterilized efficiently and effectively.
Product category: Other equipment for hygiene / sterilisation / disinfection, Sterilisation equipment, disinfection equipment and accessories, autoclaves
HWM HPS-80 Plasma Sterilizer
– Easy to install
Simply plug into a standard 220v outlet and your HPS series sterilizers are ready to go. You won’t need additional facilities such as compressed air, drainage system, ventilation system.
– Easy to use
You can start/cancel/control the sterilization process by simply pushing navigation buttons.
The selected sterilization cycle will be progressed automatically and you can monitor relevant information such as sterilization conditions, progress status, error messages from the display.
– Self-test features
When malfunction occurs during operation, an error code is displayed by self-test feature and the running sterilization cycle is interrupted automatically for safety.
– Automatic notification system for regular maintenance
Your HPS series sterilizer will automatically notify you the replacement period of consumables such as pump oil, air filter and so on. After 250 cycles of sterilization, a warning message to change oil will be displayed and your sterilizer will stop working when reaches 300 cycles without change of oil to prevent equipment failure.
– Validation of Sterilization of HPS-80
A PCD(Process Challenge Device) in accordance with EU standards(EN 867-5) is used for the validation of sterilization of HPS-100 series sterilizers at the most difficult positions inside of the sterilization load so that the most challenging medical instruments including dead-end lumens can be sterilized efficiently and effectively.
Product category: Other equipment for hygiene / sterilisation / disinfection, Sterilisation equipment, disinfection equipment and accessories, autoclaves
HWM HPS-60 Plasma Sterilizer
Recommended for Small & Mediu Medical Hospitals, Community Healthcare Centers, Military Hospitals . Long and big surgical instruments can be sterilized.
▶ Features
– Easy to install
Simply plug into a standard 220v outlet and your HPS series sterilizers are ready to go. You won’t need additional facilities such as compressed air, drainage system, ventilation system.
– Easy to use
You can start/cancel/control the sterilization process by simply pushing navigation buttons.
The selected sterilization cycle will be progressed automatically and you can monitor relevant
information such as sterilization conditions, progress status, error messages from the display.
– Self-test features
When malfunction occurs during operation, an error code is displayed by self-test feature and the running sterilization cycle is interrupted automatically for safety.
– Automatic notification system for regular maintenance
Your HPS series sterilizer will automatically notify you the replacement period of consumables such as pump oil, air filter and so on. After 250 cycles of sterilization, a warning message to change oil will be displayed and your sterilizer will stop working when reaches 300 cycles without change of oil to prevent equipment failure.
– Validation of Sterilization of HPS-60
A PCD(Process Challenge Device) in accordance with EU standards(EN 867-5) is used for the validation of sterilization of HPS-100 series sterilizers at the most difficult positions inside of the sterilization load so that the most challenging medical instruments including dead-end lumens can be sterilized efficiently and effectively.
Product category: Other equipment for hygiene / sterilisation / disinfection, Sterilisation equipment, disinfection equipment and accessories, autoclaves
HWM HPS-50 Plasma Steilizer
For small and medium-sized general hospital, surgical instruments can be sterilized long length.
▶ Features
– Easy to use
You can start/cancel/control the sterilization process by simply pushing key buttons. The selected sterilization cycle will be progressed automatically and you can monitor relevant information such as sterilization conditions, progress status, error messages from the display.
– Automatic notification system for regular maintenance
Your HPS series sterilizer will automatically notify you the replacement period of consumables such as pump oil, air filter and so on. After 250 cycles of sterilization, a warning message to change oil will be displayed and your sterilizer will stop working when reaches 300 cycles without change of oil to prevent equipment failure.
– Complete eradication of bacteria
HPS-50 maximized safety and reliability regarding to sterilization using high efficiency microwave plasma sterilization technique which spread sterilizing factors equally within the chamber
– Self Test Features
When malfunction occurs during operation, an error code is displayed by self-test features and the running sterilization cycle is interrupted automatically for safety.
– Validation of Sterilization of HPS-50
A PCD(Process Challenge Device) in accordance with EU standards(EN 867-5) is used for the validation of sterilization of a dead-end lumen at the most difficult positions inside of the sterilization load.
Product category: Other equipment for hygiene / sterilisation / disinfection, Sterilisation equipment, disinfection equipment and accessories, autoclaves
HWM HPS-30 Plasma Sterilizer
Recommended for Small Clinics including Dental Clinics, Veterinary Clinics and Fire Stations. Compact design maximizing easy to use and user convenience Countertop (exclusive cart option)
▶ Features
– Easy to use
You can start/cancel/control the sterilization process by simply pushing key buttons. The selected sterilization cycle will be progressed automatically and you can monitor relevant information such as sterilization conditions, progress status, error messages from the display.
– Automatic notification system for regular maintenance
Your HPS series sterilizer will automatically notify you the replacement period of consumables such as pump oil, air filter and so on. After 250 cycles of sterilization, a warning message to change oil will be displayed and your sterilizer will stop working when reaches 300 cycles without change of oil to prevent equipment failure.
– Complete eradication of bacteria
HPS-50 maximized safety and reliability regarding to sterilization using high efficiency microwave plasma sterilization technique which spread sterilizing factors equally within the chamber
– Self Test Features
When malfunction occurs during operation, an error code is displayed by self-test features and the running sterilization cycle is interrupted automatically for safety.
– Validation of Sterilization of HPS-30
A PCD(Process Challenge Device) in accordance with EU standards(EN 867-5) is used for the validation of sterilization of a dead-end lumen at the most difficult positions inside of the sterilization load.
Product category: Air processing systems, air purification systems, disinfection systems
HWM HPA-130W Wall Mount Disinfector
Wall Mount (Ceiling Built-in) Air Disinfector
With its simple and elegant design for enhanced space utilization, iit can perfectly fit in ORs, doctor’s office, ICUs, community healthcare centers, schools and other public institutions. Installation can be either wall-mounted or built-in.
▶ Features
1. Designed for convenient installation and mobility
2. Enhanced safety of disinfection with a built-in human-detecting sensor
3. Air purification system of plasma air disinfector
▶ Characteristics
* Voice Function : voice support for each operation mode
* Maximizing space efficiency
* Adoption of photocatalyst, TiO2, negative ion which are very antiseptic
* Enhanced safety thanks to the built-in human-detecting sensor using low temperature plasma
* Automatic filter replacement : a warning message to replace filter will be displayed after certain period of time (optimal replacement period can be set according to environment)
* Ozone sensor : To keep ozone concentration under the permissible level at all times during disinfection process
Product category: Air processing systems, air purification systems, disinfection systems
HWM HPA-85S Standing Air Disinfector
Floor Standing Air Disinfector
An innovative product that can disinfect room air in ORs, ICUs, hospitals and community healthcare centers to eliminate secondary infection sources and pollutants using UV photocatalyst, nano silver, negative ion and plasma technology.
▶ Features
1. Designed for convenient installation and mobility
2. Enhanced safety of disinfection with a built-in human-detecting sensor
3. Air purification system of plasma air disinfector
▶ Characteristics
* Voice Function : voice support for each operation mode
* Maximizing space efficiency
* Adoption of photocatalyst, TiO2, negative ion which are very antiseptic
* Enhanced safety thanks to the built-in human-detecting sensor using low temperature plasma
* Automatic filter replacement : a warning message to replace filter will be displayed after certain period of time (optimal replacement period can be set according to environment)
* Ozone sensor : To keep ozone concentration under the permissible level at all times during disinfection process
Product category: Air processing systems, air purification systems, disinfection systems
Plasma Ambulance Disinfector
A disinfecting and deodorizing device to prevent secondary infections of rescue workers and patients in an ambulance
▶ Features
1. Real-Time monitoring of internal conditions by measuring temperature and humidity
2. Monitoring of progress status through a LCD window (Verification of information including plasma, negative ion, disinfection, temperature, humidity as well as replacement period)
3. Verification of operation time and total operation time
4. Adjustment of negative ion, plasma, lamp and air volume with a remote control
5. Disinfection Mode
(Basic Mode : OH radical plasma(RIC) and super plasma(SPI) disinfection mode Selection Mode :
fumigation mode(if necessary, additional operation is available. Activated by a human-detecting sensor)
ad: contact information
About Us
Company details
Established in 2001, CU Medical Systems Inc. Was the 6th company in the world and the first in Asia to present a self-developed defibrillator – the CU-ER1. In 2008 CU Medical Systems’ devices were the first in Asia to receive USFDA and JFDA approval. CU Medical Systems’ stock has been listed on the KOSDAQ index since 2011. With offices around the globe (Japan, Germany, USA) CU Medical Systems has received global recognition. In a continuous effort to improve our range of defibrillators and AEDs CU Medical holds CE and CFDA certifications.
ad: company
H Robotics Inc.CODESTERI Inc.
CREDO CO., LTD
CUBE Instrument Inc.
Curaco, Inc.
Curexo Inc.